×

Sets with screen

Find Your Parts (beta)

Find Your Parts (beta)

Filter

PARKING SENSORS SET EPP5400 NO 3

EPP5400N NO 3


5902537822443


0.6 kg
Product Details
New product

Data sheet

Operating voltage
9V - 16V
Operating temperature
-30°C ~ +80°C
Waterproof
Tak
Power cord length
4x 2,5 m
Color
Gray (No. 3)
Sensor
22
Sensors
4
Obstacle detection range
od 0,0 m do 2,5 m
Mounting side
Tył
Shock resistance
Tak
Camera
NIE
Type
Czujnik ultradźwiękowy
Difficulty Level
Prosty
Description

THIS IS A UNIVERSAL PARKING SENSOR SET FOR EVERY VEHICLE PROVIDED THE CAR DOES NOT HAVE ORIGINAL INSTALLATION OR SENSOR HOLES LARGER THAN THE SENSORS OFFERED.


When performing a reversing maneuver, the device correctly recognizes obstacles in the vehicle's path and warns the driver through a screen and an audible signal: different colors / sound frequencies depending on the distance from the vehicle to the obstacle.

After engaging reverse gear, it automatically starts to detect all obstacles within 2.5 meters from the sensor mounting location, i.e. from the rear bumper of the car.


Removable sensors like those used for the first installation in series cars. This speeds up and eases the mounting process on the car. In case of damage to the sensor (for example, a crash), it is not necessary to remove the bumper; pull out the sensor, unscrew and replace it.


The parking sensor assembly is made of the highest quality materials that will allow you to use the device for many years. Thanks to him, you will avoid many stressful situations.


1. The oblique interior of the collar allows precise correction of the tilt angle of the sensor relative to the ground.

2. The collar is made of strong plastic, which makes it only 1.5mm thick (does not protrude from the bumper like other universal sensors)

3. The inner casing of the transducer is made of aluminum.


There are no additional "idle" (unnecessary) inputs/connectors in our control panel, which could interfere with the operation of the device.


Display:

1. Blue 2.5-1.6m

2. Green 1.5-1.1m

3. Yellow 1-0.4m

4. Red 0.3-0.0m

5. Distance indicator


Technical parameters of the set:

- Power supply: 12V DC

- Power consumption: ~4W

- Device operating temperature: -30 ° C to + 80 ° C

- Ultrasonic frequency of sensors: 40 KHZ

- Measurement error: +/- 5cm.

- Permissible inclination angle of the bumper: +/- 5 °

- Aluminum transmitter housing on the sensor

- Approval: Yes, E8 EMC (The only sensors on the market with such an approval!)


Included:

- Display

- 4 sensors in the size of 25 mm (outer diameter)

- Control Panel

- Drill (22 mm for sensors)

- Required wiring

- User manual


Our offers include sensors in other colors. Each of the sensors can also be repainted in any color.

16 other products in the same category: